Hello, welcome to our website!Add collection|Online Message|Website map

Aodoled
Professional solutions

Contact us
Fax:0750-3711799
Email:aodolighting@163.com
Tel:13902592061
address : Building 3, No.1, gaoshatan West Road, Xiacun, Hetang Town, Pengjiang district, Jiangmen City, Guangdong Province
consultation

Current location:Home > News Center > Industry news

Installation steps and precautions of LED light source module

Date:2020-05-15Visits:

The installation steps of the LED light source module are as follows:

1. The budget of the number of light source modules is arranged at equal intervals, and the distribution of light source modules is simulated on the computer to initially estimate the number of light source modules required. The visual brightness of the module spacing needs to be between 3-150px, and the thickness of the word can be selected between 5-325px.

2. Calculate the power supply, design the number of LED light source modules of the power distribution plan budget × the power of a single light source module = the total power consumption. It is recommended to leave a margin for the power supply selection and use it at 80% of the rated power.

3. Install the LED light source module A: clean the installation surface B: stick to the bottom of the module with double-sided stickers. C: Evenly arranged and connected. D: Install the slot panel and measure the effect. E: finished product

What are the precautions for LED light source modules?

1. Polarity of the LED module: the red wire is connected to the positive power level, and the white wire is connected to the negative power level

2. The vertical height of the acrylic transparent cover plate from the LED module should be greater than 5 cm and less than 13 cm, to avoid the occurrence of light spots or light and dark phenomena on the surface of the cover plate; Uniformity has a great influence, so choose carefully.

3. Working voltage: pay attention to the consistency of the voltage of the LED module and the voltage of the switching power supply.

4. Paste firmly: Make sure the LED module pasted in the light box is firm and reliable, and fix it with screws if necessary.

5. Wire length: The length of the power cord should be as short as possible (recommended not to exceed 3 meters), greater than or equal to 18AWG #, and the wire diameter should be appropriately increased if it exceeds 3 meters.

The above is the introduction of the installation steps and precautions of LED light source modules. Friends who are interested in LED light source modules are welcome to consult us!

Previous:What are the categories of LED light source modules